Cylinder Boring and Honing Machine for Motorcycle TM807A

stars, based on 0 reviews

$1699.00

Description

This machine is mainly used for maintaining the cylinder of motorcycle, etc. Place the cylinder to be bored under the base plate or on the plane of the base of the machine after the center of the cylinder hole is

determined, and the cylinder is fixed, maintenance of boring and honing can be carried out. The Cylinders of the motorcycles with diameter 39-72mm and depth within 160mm can all be bored and honed. If the suitable fixture are fitted, other cylinder bodies with corresponding requirements can also be bored and honed.

Main Specification:

Model		TM807A
Diameter of boring &honing hole		39-72mm
Max. Boring & honing depth		160mm
Rotational speed of boring &spindle		480r/min
Steps of variable speed of boring honing spindle		1step
Feed of boring spindle		0.09mm/r
Return and rise mode of boring spindle		Hand operated
Rotational speed of honing spindle		300r/min
Honing spindle feeding speed		6.5m/min
Electric motor	Power	0.75.kw
	Rotational	1400r/min
	Voltage	220v or 380v
	Frequency	50HZ
Overall dimensions(LWH) mm		6804801160
Packing(LWH) mm		8206001275
Weight of main machine(approx)		N.W 230kg G.W280kg

Standard accessories:

tool box, accessories box, centering device, centering rod, centering push rod,specific micrometer, press ring of cylinder, press base, packing ring of lower cylinder, boring cutter, springs for cutter,Hex, socket wrench, multi-wedge belt, spring (for centering push rod), base for honing cylinder, honing tool, clamp pedestal, press piece,adjust support, screw for pressing.